DIN Rail Transformer (2nd Generation) for Ring Wired Video Doorbells

Product Information

The Corner Mount can angle your Ring Video Doorbell to improve motion detection and provide a better view. Note: Do not use any screw other than the included long mounting screws when securing your Ring doorbell. Mounting screws - Use two to mount your Ring Doorbell. Use the longer screws if you’re installing with the optional Retrofit Kit.

Here the transformer is at the bottom of the chime. You can see the markings which show mains voltage is connected at the bottom, and outputs 8V to the doorbell mechanism above.If you're setting up with a Plug-In Adapter, you can choose to temporarily connect your doorbell to your home wifi network before physically installing your device. Similar to but distinct from hydraulic valves, solenoid valves are an electromechanical component acting as a functional interface between electrical or electronic control systems and pneumatic drives, using an electric current to generate a magnetic field and thus operate a mechanism. This allows for the automatic operation of the valve, without requiring an engineer to physically manipulate it themselves. In some cases, your doorbell transformer may integrated into your internal doorbell. In this configuration, mains power runs from your fusebox directly to the transformer in your doorbell. To replace this type of transformer, make sure that your main power switch is off, then install the Ring transformer in your fusebox. Next, connect mains power to its 240 volt inputs. Your doorbell will take a few minutes to start up. Once the blue light starts spinning, you'll be able to connect the doorbell to your wireless network. Follow the in-app steps. 9. Secure your Ring doorbell

In this example. the wires on the left (0 and 3) are the wires that power the doorbell’s physical mechanism (or in electrical terms, its solenoid or coil), making it produce sound. If you look closely, you can see thin wires, running from terminals 0 and 3 to the hidden solenoid. By contrast, terminals 1 and 2 are connected directly to each other via a thin wire (meaning they aren’t providing power to your doorbell). Solenoid valves are widely used in systems where the flow of very clean liquids, gases or light oils needs to be controlled and moderated. Today, many such products are configured for easy and convenient mounting to DIN rail systems, and these systems will require DIN connectors for solenoid valves to ensure reliable flow between the various components mounted along the system. Remove the 230 V high voltage line (brown) and neutral (blue) cables from the input terminals and place to one side, ensuring that these are not touching any other cables, metal or conductive surfaces.Connect the previously disconnected 230V high voltage line (brown) and neutral (blue) cables to terminals L & N on the bottom of the transformer.(ensure these are going into the correct input terminals). To bypass your existing chime, unscrew the wires from your existing chime. Twist them together using a wire nut.